AI & EMERGING TECH
Robotics: Run and Test Your First Robot on a Simulated Bench
Understand sense, think, act, learn just enough electricity and code to read a sketch, then run and test the code of two robots, an obstacle-avoider and a line-follower, on a simulated bench inside the lessons, in your phone's browser. Nothing drives and nothing needs buying, and you finish with an honest test log.
- 12 lessons
- ~3 hours
- Beginner-friendly
- Project + certificate
Free account required to open the lessons. Any price is shown before you pay.
- Free to startOpen a free account and start. Any price is shown before you pay.
- Earned, not boughtCertificates are never sold. You pass a graded project, and anyone can verify it.
- Self-pacedShort lessons you take at your own pace. Your progress is saved.
- Built for real workLessons follow how the work is actually done and paid for, and end in a project you can show.
What you'll learn
- Sense, think, act: reading any machine as a loop
- Just-enough electricity: voltage, current, resistance, the loop and common ground
- Microcontroller pins, and reading a first Arduino sketch line by line
- Reading sensors as printed numbers: distance by echo, a line by light
- Motors, motor drivers and PWM speed control
- Power budgets, AA cells and lithium safety rules
- If-then rules and state tables
- Running and testing an obstacle-avoider and a line-follower on a simulated bench
- Test cases at the edge of a rule, and one-change-at-a-time debugging
- Finding the fault in a faulty build, and keeping an honest build-and-test log
- Pricing real parts from dated, named sources, and the wiring discipline a real build needs
- Saying honestly what you tested, and knowing where the work might be
About this course
A practical first course in robotics for a beginner with a phone and no lab. It follows Morayo Alabi, a school leaver in Ilorin with an Android phone on weekdays and her old school's club laptop on Saturdays, as she runs, tests and debugs the code of a small robot called Ijapa. Mr Ajibade, the physics teacher who runs the Saturday robotics club, asks the awkward questions, and her younger brother Deji breaks things. Every lesson makes one thing work, with the mistake shown first. You will learn what a robot is (sense, think, act); just enough electricity to work safely (voltage, current, resistance, the loop, common ground, the breadboard and the bench rules); how a microcontroller and its pins work, starting with a blinking light; how to read a distance sensor and two line sensors as printed numbers; why a pin cannot drive a motor, what a motor driver and PWM do, and where servos fit; how to add up a power budget, why AA cells come first, and the safety rules for lithium cells; and how to turn plain if-then rules into a state table and then into code. You then run and test two robots, an obstacle-avoider and a line-follower, learn to debug one change at a time, find the fault in a faulty build, and keep an honest build-and-test log. The lab is a simulated bench built into the lessons: under each sketch there is a Run this code button, and the sketch runs there on a simulated board, in the English web lesson in the browser of your phone or computer, with nothing to install and nothing to buy. The course is honest about what that bench is. It shows what each wheel is told to do, in words, with the distance set to an exact centimetre; nothing drives around, and you build nothing physical unless you choose to. You do not type code on the bench: you choose from listed versions of each sketch, so that a phone is enough and every learner tests the same thing. The Skillnaija phone app and lessons read in other languages do not run code, and on a slow phone the bench runs in slow motion and says so. Real parts are optional: one lesson prices a real robot from named Nigerian shops with dated prices, and covers compatible boards, wiring discipline and soldering safety through one school club's real robot. The last lesson looks at where robotics and AI are going, the lines this course does not cross (nothing on mains, nothing that flies, nothing meant to hurt, frighten or spy on people) and where the work might be, with no promise of jobs. The project is your own test record for the course's two robots on the bench, with your log. Lessons include narrated animated explainers, credited photos and short clips; videos play only when you tap them. Free to learn.
Saturday 29 August 2026, the physics lab at Morayo Alabi's old school in Ilorin. Her brother Deji, 11, puts his remote-control car on the lab table. "I already have a robot." Morayo, 19, agrees with him. Mr Ajibade, the physics teacher who runs the Saturday robotics club, asks: "Who is doing the seeing? Who is deciding?" Deji looks at his own thumb on the stick. Then Mr Ajibade turns the club's laptop round. On the screen, inside a lesson like this one, is a robot called Ijapa on a simulated bench. He brings a wall nearer, a centimetre at a tap. A line of text changes, the right wheel is told to stop, and nobody is holding a stick.
Who it's for
Beginner-friendly. You can start from scratch: no prior experience is assumed.
The lessons 12 lessons, ending in a graded project
- 1What a robot is: sense, think, act16 min
- 2Electricity, just enough: the loop, three quantities and the bench rules16 min
- 3The brain: a microcontroller, its pins, the bench and a first blink17 min
- 4Sensing: digital and analog, distance by echo, a line by light17 min
- 5Moving: motors, the driver, PWM speed and a word on servos17 min
- 6Power: batteries, the power budget and brownouts16 min
- 7Thinking: from if-then rules to a state table, and a first look at proportional steering16 min
- 8Robot one: the obstacle-avoider, tested row by row on the bench17 min
- 9Robot two: the line-follower, four rows and the wrong wheel17 min
- 10Debugging and testing: one thing at a time, and the honest log18 min
- 11From the bench to real parts: the shopping list, honest boards, wiring discipline and soldering17 min
- 12Where robotics is going, where the work might be, and your project17 min
- Project: Your first robot, tested honestly: a build-and-test logGraded
THE PROJECT AND YOUR CERTIFICATE
Your first robot, tested honestly: a build-and-test log
One shared Google Doc link with the robot sheet, the readings sheet, the motors and power sheet, the rules and state tables, the test-case tables for both robots, the build-and-test log and the real-parts plan with the honest statement, with screenshots of the bench and its printed lines (four are enough); plus a write-up (5,000 characters at most) that pastes the words proving each part, with each row of a table written as one line.
Certificates on Skillnaija are earned, not issued for attendance: you submit this project, an examiner grades the real work against a published rubric (you need 65% to pass), and passing issues a certificate anyone can verify. If you don't pass yet, you get written feedback and can try again.
- The robot sheet, readings and sums show real understanding: sense, think, act; a printed line read with the right units; and why a pin cannot drive a motor, in numbers20%
- The rules and state tables were written first, cover every case exactly once, and match what the robots did when tested (a first draft corrected after testing, with the correction shown, counts in full)20%
- The test cases are specific: expected results decided before looking, the edge of the rule tested at 19, 20 and 21 cm, a very near reading and a far reading tested, all four line-follower rows covered, and a case that could not be tested on the bench as printed admitted and explained25%
- The build-and-test log is honest and useful: at least eight entries, each running one listed version or changing nothing, the printed lines recorded, failures and wrong predictions kept in, and one fault found and fixed with before and after (one of the bench's faulty builds counts when the log says so, gives the learner's guess before looking and names the line the bench showed)25%
- Safe and honest about limits: the device is stated, what the bench did not prove is named, the real-parts plan uses dated prices from named sources or says 'bench only', and the statement promises nothing untested10%
Frequently asked questions
Is Robotics: Run and Test Your First Robot on a Simulated Bench free?
Most Skillnaija courses can be started free with a free account: your first two courses are free to start, then one new course each month. Some courses are paid; the course page in the app shows whether Robotics: Run and Test Your First Robot on a Simulated Bench is one, and its price, before you pay. You can also buy any course on its own for twelve months, or open every course with the All-Access Pass. Certificates are never sold: you earn one by passing the course's project.
How long does Robotics: Run and Test Your First Robot on a Simulated Bench take to complete?
6 weeks · ~3 hrs/week. There are 12 lessons, about 3 hours of material in total. You learn at your own pace and your progress is saved.
Do I need any experience to start Robotics: Run and Test Your First Robot on a Simulated Bench?
Beginner-friendly; runs in a phone's browser, not the app; no parts to buy. You can start from scratch — no prior experience is assumed.
What will I learn in Robotics: Run and Test Your First Robot on a Simulated Bench?
You will build practical skills in Sense, think, act: reading any machine as a loop, Just-enough electricity: voltage, current, resistance, the loop and common ground, Microcontroller pins, and reading a first Arduino sketch line by line, Reading sensors as printed numbers: distance by echo, a line by light, Motors, motor drivers and PWM speed control, Power budgets, AA cells and lithium safety rules, If-then rules and state tables, Running and testing an obstacle-avoider and a line-follower on a simulated bench, Test cases at the edge of a rule, and one-change-at-a-time debugging, Finding the fault in a faulty build, and keeping an honest build-and-test log, Pricing real parts from dated, named sources, and the wiring discipline a real build needs, Saying honestly what you tested, and knowing where the work might be. Every lesson is written in plain English, with examples drawn from how the work is actually done and paid for, in Nigeria and beyond.
Do I get a certificate for Robotics: Run and Test Your First Robot on a Simulated Bench?
Yes, but it has to be earned. You complete the course project — Your first robot, tested honestly: a build-and-test log and submit it for grading. Passing the project issues a verifiable certificate; finishing the lessons alone does not.
Ready to start Robotics: Run and Test Your First Robot on a Simulated Bench?
It is self-paced, and it ends with something you can show an employer.
Start learning free